Table T8. Affine table indicating the amount that each core in each hole needs to be offset in order to construct a continuous record, Site U1340.
| Core |
Offset (m) |
|---|---|
| 323-U1340A- | |
| 1H | –0.06 |
| 2H | 1.05 |
| 3H | 1.30 |
| 4H | 1.61 |
| 5H | 7.27 |
| 6H | 7.31 |
| 7H | 7.31 |
| 8H | 7.31 |
| 9H | 7.31 |
| 10H | 7.31 |
| 11H | 7.31 |
| 12H | 7.31 |
| 13H | 7.31 |
| 14H | 7.31 |
| 15H | 7.31 |
| 16H | 7.31 |
| 17H | 7.31 |
| 18H | 7.31 |
| 19H | 7.31 |
| 20H | 7.31 |
| 21H | 7.31 |
| 22D | 7.31 |
| 23H | 7.31 |
| 24H | 7.31 |
| 25H | 7.31 |
| 26H | 7.31 |
| 27H | 7.31 |
| 28H | 7.31 |
| 29H | 7.31 |
| 30H | 7.31 |
| 31H | 7.31 |
| 32H | 7.31 |
| 33H | 7.31 |
| 34H | 7.31 |
| 35H | 7.31 |
| 36H | 7.31 |
| 37H | 7.31 |
| 38H | 7.31 |
| 39H | 7.31 |
| 40H | 7.31 |
| 41H | 7.31 |
| 42H | 7.31 |
| 43X | 7.31 |
| 44X | 7.31 |
| 45X | 7.31 |
| 46X | 7.31 |
| 47X | 7.31 |
| 48X | 7.31 |
| 49X | 7.31 |
| 50X | 7.31 |
| 51X | 7.31 |
| 52X | 7.31 |
| 53X | 7.31 |
| 54X | 7.31 |
| 55X | 7.31 |
| 56X | 7.31 |
| 57X | 7.31 |
| 58X | 7.31 |
| 59X | 7.31 |
| 60X | 7.31 |
| 61X | 7.31 |
| 62X | 7.31 |
| 63H | 7.31 |
| 64H | 7.31 |
| 65H | 7.31 |
| 66H | 7.31 |
| 67H | 7.31 |
| 68X | 7.31 |
| 69X | 7.31 |
| 70X | 7.31 |
| 71X | 7.31 |
| 323-U1340B- | |
| 1H | –0.21 |
| 2H | 1.74 |
| 3H | 1.48 |
| 4H | 6.81 |
| 5H | 6.77 |
| 6H | 4.71 |
| 323-U1340C- | |
| 1H | 10.03 |
| 2H | 25.72 |
| 3H | 15.29 |
| 323-U1340D- | |
| 1H | 0.00 |
| 2H | 2.41 |
| 3H | 15.80 |
Previous | Close | Next | Top of page