Table T4. Measurements and specifications for wireline tools.
Tool string | Tool | Measurement | Sampling interval (cm) |
Approximate vertical resolution (cm) |
---|---|---|---|---|
Triple combination | MGT* | Spectral gamma ray | 15 | |
HNGS‡ | Spectral gamma ray | 15 | 51 | |
APS | Porosity | 5 and 15 | 43 | |
HLDT | Bulk density | 2.5 | 38 | |
DIT-E | Resistivity | 15 | 200/150/76 | |
TAP | Temperature | 1 per s | NA | |
Tool acceleration | 4 per s | NA | ||
Pressure | 1 per s | NA | ||
Formation MicroScanner (FMS)-sonic combination | NGT | Spectral gamma ray | 15 | 46 |
GPIT | Tool orientation | 0.25 and 15 | NA | |
FMS | Microresistivity | 0.25 | 0.5 | |
DSI/SDT/LSS/BHC | Acoustic velocity | 15 | 107 |
Notes: All tool and tool string names (except the TAP and MGT tools) are trademarks of Schlumberger. For additional information about tool physics and use, consult IODP–USIO Science Services, LDEO, at iodp.ldeo.columbia.edu/TOOLS_LABS/tools.html. See Table T5 for explanations of acronyms used to describe tool strings and tools. * = not included in each logging run. NA = not applicable.
Previous | Close | Next | Top of page