Table T11. Logging operations, Hole U1318A.
Date (May 2005) |
Local time (h) |
Comments |
---|---|---|
10 | 1030 | Hole preparation complete, rig up triple combo (HNGS-APS-HLDS-DIT-EMS-TAP) |
10 | 1130 | Run into hole with triple combo |
10 | 1310 | Uplog with triple combo at 900 ft/h from total depth |
10 | 1350 | Pull tools out of hole and rig down |
10 | 1515 | Rig up FMS-sonic (SGT-DSI-GPIT-FMS) |
10 | 1600 | Run into hole with FMS-sonic |
10 | 1705 | First pass with FMS at 900 ft/h from total depth |
10 | 1740 | Going down for main pass to seafloor |
10 | 1755 | Uplog with FMS at 900 ft/h from total depth |
10 | 1855 | Pull tools out of hole and rig down |
10 | 2000 | Clear rig floor of logging tools, sheaves, and wireline |
10 | 2100 | End of logging operation |
Notes: Drillers total depth = 664 mbrf, water depth = 409 m, end of pipe = 70 mbsf, total cored depth = 242 mbsf, total logged depth = 242 mbsf. HNGS = Hostile Environment Natural Gamma Ray Sonde, APS = Accelerator Porosity Sonde, HLDS = Hostile Environment Litho-Density Sonde, DIT = Dual Induction Tool, EMS = Environmental Measurement Sonde, TAP = Temperature/Acceleration/Pressure tool, WST = Well Seismic Tool, SGT = Scintillation Gamma Ray Tool, DSI = Dipole Sonic Imager, GPIT = General Purpose Inclinometry Tool, FMS = Formation MicroScanner.
Previous | Close | Top of page