Previous   |   Close  

Table T2. Ring shear test data, Sites U1322 and U1324.

Hole, core, section,
interval (cm)
Depth
(mbsf)
Setting Normal
stress
(MPa)
Friction coefficient M at 0.005 mm/min Internal angle
of friction at
0.005 mm/min
(°)
Friction coefficient M at 0.014 mm/min Internal angle
of friction at
0.014 mm/min
(°)
Friction coefficient M at 0.18 mm/min Internal angle
of friction at
0.18 mm/min
(°)
Friction coefficient M at 1.8 mm/min Internal angle
of friction at
1.8 mm/min
(°)
308-
U1322B-26H-3, 47–67 213.9 Mass transport deposit 0.962 0.182 10.332 0.174 9.871 0.205 11.585 0.184 10.426
1.914 0.195 11.034 0.166 9.425 0.175 9.926 0.174 9.871
3.817 0.179 10.148 0.184 10.426 0.178 10.093 0.150 8.531
7.624 0.210 13.982 0.172 9.759 0.192 10.869 0.174 9.871
15.237 0.249 13.982 0.186 10.537 0.210 11.860 0.220 12.407
U1322D-3H-3, 15–40 103.0 Mass transport deposit 0.962 0.161 9.146 0.161 9.146 0.169 9.592 0.130 7.407
1.914     0.136 7.745        
3.817 0.188 10.647 0.203 11.475 0.199 11.254 0.165 9.370
7.624 0.189 10.702 0.176 9.981 0.189 10.703 0.177 10.037
15.237 0.243 13.658 0.189 10.703 0.211 11.915 0.214 12.079
U1324B-4H-1, 100–120 24.0 Normally sedimented 0.962 0.117 6.673 0.116 6.617 0.142 8.082 0.208 11.745
1.914 0.174 9.871 0.169 9.592 0.172 9.759 0.158 8.979
3.817 0.163 9.258 0.155 8.817 0.161 9.146 0.139 7.913
15.237 0.272 15.216 0.169 9.592 0.203 11.475 0.255 14.306
U1324B-50H-2, 110–130 391.0 Levee turbidite 0.962 0.356 19.596 0.185 10.481 0.290 16.172 0.309 17.171
1.914 0.307 17.066 0.271 15.163 0.277 15.482 0.268 15.003
3.817 0.163 9.258 0.155 8.811 0.161 9.146 0.139 7.913
7.624 0.223 12.571 0.197 11.144 0.247 13.874 0.223 12.571
15.237 0.286 15.961 0.179 10.148 0.221 12.462 0.282 15.748

Previous   |   Close    |    Top of page