Figure F14. Control logs of Hole C0001D. LSF = LWD depth below seafloor, SWOB = surface weight on bit, ROP = rate of penetration, SPPA = standpipe pressure, HDEVI = hole deviation, ADIA= average borehole diameter, ECD = equivalent circulating density, APRS = average annular pressure, STICK = stick slip indicator, SHK= shock indicator, GR = gamma ray, TAB_RAB_BD = time after bit deep button resistivity, TAB_RAB_RING = time after bit ring resistivity, TAB_RAB_BIT = time after bit resistivity, TAB_RAB_GR = RAB gamma ray time after bit, RES_BIT = resistivity-at-the-bit, RES_ BD = deep button resistivity, RES_RING = resistivity at ring, RHOB = bulk density, DRHO = bulk density correction, VP = sonic velocity, DTCO = compressional wave slowness, GVR = geoVISION resistivity tool. First vertical color-coded sonic column is indicative of the processing (blue = mostly wide frequency algorithm/processing, green = combination of wide and leaky-P processing). The second vertical column is indicative of data confidence (green = reasonably continuous data interpreted to show formation slowness).
Previous | Close | Next | Top of page