Figure F35. Density and resistivity obtained on discrete samples and from logging-while-drilling (LWD) in the lower part of Holes C0002A and C0002B. Density from gamma ray backscattering is represented only in intervals with a borehole average diameter of <9.5 inches. For comparison with LWD bit resistivity, which explores a volume around the drill bit, sample resistivity represented is the geometric mean of the horizontal and vertical resistivity measured on the samples. The resistivity of the samples is corrected for in situ temperature assuming a gradient of 35°C/km. CSF = core depth below seafloor.
Previous | Close | Next | Top of page