Table T3. Configuration of new subseafloor borehole observatory (CORK) completion hardware deployed in Hole U1382A.
| Part number | Description | Diameter (inch) | Connection | Measured length (m) |
Cumulative bottom depth (mbsf) |
Comments | ||
|---|---|---|---|---|---|---|---|---|
| Outside | Inside | Up | Down | |||||
| CORK | 5.00 | 4.05 | 4.50 8RD STC pin | 1.32 | 1.3 | 1.18 m CORK + 0.14 mbsf | ||
| 27 | Casing, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 11.50 | 12.8 | |
| 28 | Casing, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 13.75 | 26.6 | |
| 29 | Casing, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 13.73 | 40.3 | |
| 30 | Casing, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 11.31 | 51.6 | |
| 31 | Casing, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 11.48 | 63.1 | |
| 32 | Casing, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 11.47 | 74.6 | |
| 33 | Casing, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 13.77 | 88.3 | |
| OH5071 | Casing pup, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 2.00 | 90.3 | |
| OH5071 | Casing pup, 4.5 inch, 10.5 lb | 5.00 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 2.00 | 92.3 | |
| D2 | Packer, combo, 4.5 inch, coated | 10.50 | 4.05 | 4.50 8RD cplg box | 4.50 8RD STC pin | 9.07 | 101.4 | 10.75 inch 54 lb casing to 102 mbsf |
| OJ3221 | Landing seat, 3.375 inch, coated | 5.00 | 3.375 | 4.50 8RD STC box | 4.50 8RD STC pin | 0.19 | 101.6 | |
| OJ3225 | Crossover, 4-1/2 inch LTC × 4-1/2 inch EUE | 5.00 | 4.00 | 4.50 8RD LTC box | 4.50 8RD EUE pin | 0.18 | 101.8 | |
| 76 | Casing, 4.5 inch, fiberglass - red | 5.00 | 3.91 | 4.50 8RD EUE box | 4.50 8RD EUE pin | 8.80 | 110.6 | |
| 77 | Casing, 4.5 inch, fiberglass - red | 5.00 | 3.91 | 4.50 8RD EUE box | 4.50 8RD EUE pin | 8.77 | 119.3 | |
| 78 | Casing, 4.5 inch, fiberglass - red | 5.00 | 3.91 | 4.50 8RD EUE box | 4.50 8RD EUE pin | 8.84 | 128.2 | |
| 79 | Casing, 4.5 inch, fiberglass - red | 5.00 | 3.91 | 4.50 8RD EUE box | 4.50 8RD EUE pin | 8.83 | 137.0 | |
| 80 | Casing, 4.5 inch, fiberglass - red | 5.00 | 3.91 | 4.50 8RD EUE box | 4.50 8RD EUE pin | 8.83 | 145.8 | |
| OJ3226 | Crossover, 4-1/2 inch EUE × 4-1/2 inch STC | 5.50 | 4.00 | 4.50 8RD EUE box | 4.50 8RD STC pin | 0.19 | 146.0 | |
| OJ3282 | Crossover, 4.5 inch × 5.5 inch, coated | 5.50 | 4.05 | 4.50 8RD LTC box | 5.50 8RD LTC pin | 0.19 | 146.2 | |
| OJ3283 | Casing, 5.5 inch, perforated, coated, 14 lb | 6.05 | 5.01 | 5.50 8RD LTC cplg | 5.50 8RD STC pin | 3.12 | 149.3 | |
| OJ3284 | Casing, 5.5 inch, perforated, coated, 14 lb | 6.05 | 5.01 | 5.50 8RD LTC cplg | 5.50 8RD STC pin | 6.12 | 155.5 | |
| OJ3284 | Casing, 5.5 inch, perforated, coated, 14 lb | 6.05 | 5.01 | 5.50 8RD LTC cplg | 5.50 8RD STC pin | 6.12 | 161.6 | Miniscreens* |
| OJ3281 | Crossover, 5.5 inch × 6.75 inch, coated | 6.75 | 4.13 | 5.50 8RD LTC box | 5.5 FH pin | 0.48 | 162.1 | |
| OJ3285 | Drill collar, perforated, coated | 6.75 | 4.13 | 5.50 FHM box | 5.5 FHM pin | 4.29 | 166.3 | |
| OJ3285 | Drill collar, perforated, coated | 6.75 | 4.13 | 5.50 FHM box | 5.5 FHM pin | 4.29 | 170.6 | |
| OJ3285 | Drill collar, perforated, coated | 6.75 | 4.13 | 5.50 FHM box | 5.5 FHM pin | 4.29 | 174.9 | |
| OJ3285 | Drill collar, perforated, coated | 6.75 | 4.13 | 5.50 FHM box | 5.5 FHM pin | 4.29 | 179.2 | |
| OJ3285 | Drill collar, perforated, coated | 6.75 | 4.13 | 5.50 FHM box | 5.5 FHM pin | 4.29 | 183.5 | |
| OJ3285 | Drill collar, perforated, coated | 6.75 | 4.13 | 5.50 FHM box | 5.5 FHM pin | 4.29 | 187.8 | |
| OJ3286 | Bullnose, coated | 6.75 | 4.13 | 5.50 FHM box | Bullnose | 0.91 | 188.7 | |
* = 160.0–161.6 m microbiology umbilicals (0.5 inch ID Tefzel), 158.0 m stainless steel pressure and packer inflation umbilicals (1 × 0.5 inch OD and 2 × 0.25 inch OD), and 160–161 m stainless steel geochemistry umbilicals (3 × 0.25 inch OD and 3 × 0.125 inch OD). Part numbers beginning with “OJ” designate USIO engineering part numbers; numbers 27–80 are identification numbers assigned when casing was loaded and measured. ID = inside diameter, OD = outside diameter. 8RD = size of threaded tubing connection, STC = short thread coupling, cplg = coupling, LTC = long thread coupling, EUE = external upset ends connection, FH = full hole threaded tool joint, FHM = full hole modified tool joint, box = female threaded connection, pin = male threaded connection.
Previous | Close | Next | Top of page