Figure F3. Photograph of Expedition 336 subseafloor borehole observatory (CORK) wellheads at the start of the expedition. The tops of the CORK wellheads are shown at the bottom of the photograph. The left CORK was prepared for deployment in Hole 395A, and the longer cup packer extension at the base of this wellhead is indicated. The configuration of each of the three wellhead bays (i.e., chemistry, microbiology [MBIO], and pressure bays) is also shown. Final configurations of these wellheads prior to deployment are shown in Figures F12 and F13. Photo courtesy of Bill Crawford/TAMU.
Previous | Close | Next | Top of page