Close   |    Next

Table T1. Tie points of revised splice, Site U1387.

Hole, core, section,
interval (cm)
Hole, core, section,
interval (cm)

Offset (m)

Comments
Preferred revised splice including Core 339-U1387A-33X
U1387B-18X-7, 22 Tie to U1387A-19X-2, 85 0.00 Shipboard splice tie
U1387A-19X-4, 126 Tie to U1387B-19X-2, 52 0.19  
U1387B-19X-6, 10 Tie to U1387A-20X-2, 144 0.00  
U1387A-20X-5, 103 Tie to U1387B-20X-1, 52 0.36  
U1387B-20X-5, 128 Tie to U1387A-21X-1, 89 0.81  
U1387A-21X-5, 109 Tie to U1387B-21X-1, 11 0.00  
U1387B-21X-6, 56 Tie to U1387A-22X-2, 6 1.39 Based on XRF data
U1387A-22X-6, 64 Tie to U1387B-22X-1, 125 1.86  
U1387B-22X-6, 74 Tie to U1387A-23X-1, 109 1.94 Based on δ18O Globigerina bulloides data
U1387A-23X-4, 128 Tie to U1387B-23X-1, 38.5 0.00  
U1387B-23X-7, 42 Tie to U1387A-24X-1, 3 1.75 Based on XRF and SST data
U1387A-24X-5, 138 Tie to U1387B-24X-2, 72 0.61  
U1387B-24X-CC, 26 Append to U1387A-25X-1, 10 2.01 Short coring gap
U1387A-25X-4, 150 Tie to U1387B-25X-1, 56 0.00  
U1387B-25X-6, 125 Tie to U1387A-26X-1, 5 2.94  
U1387A-26X-4, 87 Tie to U1387B-26X-1, 52 0.96 Based on XRF data
U1387B-26X-7, 21 Tie to U1387A-27X-1, 50 2.52  
U1387A-27X-CC, 16 Append to U1387A-28X-1, 0 0.00  
U1387A-28X-5, 113 Tie to U1387B-28X-2, 119 0.14 Based on XRF data
U1387B-28X-CC, 37 Tie to U1387A-29X-1, 24 2.79  
U1387A-29X-5, 66 Tie to U1387B-29X-2, 36 –0.15 Based on XRF data
U1387B-29X-CC, 21 Append to U1387A-30X-1, 0 3.28 Short coring gap
U1387A-30X-4, 110 Tie to U1387B-30X-2, 39 0.21  
U1387B-30X-CC, 22 Tie to U1387A-31X-1, 5 1.84  
U1387A-31X-5, 49 Tie to U1387B-31X-1, 114 0.29  
U1387B-31X-CC, 32 Append to U1387A-32X-1, 0 4.02 Short coring gap
U1387A-32X-5, 139 Tie to U1387B-32X-2, 103 1.43  
U1387B-32X-7, 102 Tie to U1387A-33X-1, 16 3.59 Based on benthic δ18O data
U1387A-33X-CC, 7 Tie to U1387B-33X-1, 23 3.52  
U1387B-33X-4, 14 Tie to U1387C-3R-1, 101 –1.56  
U1387C-3R-4, 123 Tie to U1387A-34X-3, 76 0.46  
U1387A-34X-CC, 11 Tie to U1387B-34X-1, 4 5.52 Based on δ18O Globigerina bulloides data
U1387B-34X-7, 67 Tie to U1387A-35X-3, 12 0.32 Based on benthic δ18O data
U1387A-35X-CC, 38 Tie to U1387B-35X-2, 2 4.39  
U1387B-35X-5, 138 Tie to U1387C-5R-3, 27 –0.07  
U1387C-5R-5, 23, Tie to U1387A-36X-5, 90 –2.47 Based on wt% sand data
U1387A-36X-CC, 25 Append to U1387B-36X-1, 0 4.86 Short coring gap
U1387B-36X-5, 127 Tie to U1387A-37X-2, 56 –0.01  
U1387A-37X-6, 77 Tie to U1387C-7R-1, 93 0.40 Based on δ18O Globigerina bulloides and wt% sand data
U1387C-7R-5, 65 Tie to U1387A-38X-1, 93 1.86  
U1387A-38X-6, 133 Tie to U1387C-8R-2, 13 0.94 Based on δ18O Globigerina bulloides data
Revised splice using Core 339-U1387C-2R  
U1387B-32X-7, 105 Tie to U1387C-2R-3, 85 0.00 Shipboard splice tie
U1387C-2R-7, 25 Tie to U1387B-33X-1, 5 3.20  
Subsequent transitions are the same as preferred revised splice.

Offset between mcd and corrected mcd is at the respective transition. XRF = X-ray fluorescence, SST = sea-surface temperature.

Close   |    Next   |    Top of page