Previous   |    Close   |    Next

Table T4. Bottom-hole assemblies (BHAs) used for Site C0002.

Hole Drilling type Water
depth
(mbsl)
Top hole depth
(mbsf)
Top hole
depth BRT
(m)
Total depth
(mbsf)
Total depth BRT
(m)
Bit size
(inch)
BHA
C0002M SD-RCB 1937.5 0.0 1967.5 512.5 2480.0 8-1/2 Bit × near-bit sub (w/float and inner tube stabilizer) × DC sub (w/landing ring) × landing sub × head sub (w/ latch sleeve) × 7 inch coring DC (11) × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (21 stands) × 5-1/2 inch DP S-140 (21 stands) × XO × 5-1/2 inch DP S-150
C0002F LWD/MWD 1939.0 0.0 1967.5 2005.5 3973.0 12-1/4 Bit × GVR × ARC8 × TeleScope × 12-1/8 inch ILS × sonicVISION × 12-1/8 inch stab × 8-1/2 inch DC (1) × CST × Anderreamer × F/S × 9-1/2 inch DC (2) × 17 inch stab × 9-1/2 inch DC (1) × XO × 8-1/2 inch DC (3) × 7-3/4 inch Jar × 8-1/2 inch DC (3) × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (46 stands) × 5-1/2 inch DP S-150
C0002N Sidetrack 1939.0 860.0 2827.5 2330.0 4297.5 17 Bit × sleeve stab × Geopilot9600 w/near-bit stab × flex collar × 16-7/8 inch ILS × 8 inch DGR × 8 inch EWR × 8 inch PWD × 8 inch HCIM × HOC × MWD down screen × float sub (w/float) × 8-1/2 inch DC (12) × 8 inch hydraulic Jar × 8-1/2 inch DC (2) × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (53 stands) × XO × 5-1/2 inch DP S-150
  Casing run 1939.0 NA NA 2009.0 3976.5 NA 13-3/8 inch casing PADPRT × XO × 5-1/2 inch DP S-150 (6 m) × XO × XO × 5-7/8 inch DP NK-155 (3) × 5-7/8 inch DP NK-155 (18 stands) × XO × 6-5/8 inch DP UD-165 (1 stand) × 6-5/8 inch DP (6 m) × 6-5/8 inch DP (31 stands) × CMT stand
  Fishing 1939.0 NA NA 1886.4 3853.9 NA Screw-in sub (5¾ inch DSTJ pin) × XO × 5.68 inch HWDP (2) × XO × drilling jar × 8-1/2 inch DC (2) × XO × 5.68 inch HWDP (12) × 5-1/2 inch DP S-150 (21 stands) × XO × XO × 5-7/8 inch DP NK-155 (19 stands) × XO × 6-5/8 inch DP Z-140 (25 stands) × XO × 6-5/8 inch DP UD-165
  WBRRT 1939.0 NA NA NA NA NA Jetting sub × XO × 5-1/2 inch DP S-140 (1stand) × XO × 8-1/2 inch DC (1) × 12¼ inch stab × 8-1/2 inch DC (5) × XO × 5-1/2 inch DP S-140 (1 stand) × XO × WBRRT × XO × 5-1/2 inch DP pup (6 m) × 5 inch DP S-140 (44 stands) × 6-5/8 inch DP Z-140
C0002P Window milling 1939.0 1935.5 3903.0 1954.5 3922.0 12-1/4 Lead mill × 8-1/2 inch DC (1) × 12-1/4 inch stab × secondary mill × flex mandrel × steering mill × 8-1/2 inch DC (9) × XO × 8-1/2 inch coring DC (12) × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (26 stands) × 5-1/2 inch DP S-140 (21 stands) × XO × 5-1/2 inch DP S-150 (25 stands) × XO × 6-5/8 inch DP Z-140
  Kick-off 1939.0 1936.5 3904.0 2162.5 4130.0 12-1/4 Bit × motor × 12 inch stab × HOC × DH screen × float sub (w/float) × 8-1/2 inch DC (12) × drilling jar × 8-1/2 inch DC (2) × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (44 stands) × 5-1/2 inch DP S-140 (21 stands) × XO × 5-1/2 inch DP S-150 (25 stands) × XO × 6-5/8 inch DP Z-140
  RCB 1939.0 2162.5 4130.0 2118.0 4085.5 10-5/8 Bit × bit sub w/stab × RCB core barrel × top sub × head sub × 10-5/8 inch stab × 8-1/2- inch coring DC (12) × coring jar × 8-1/2 inch coring DC (3) × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (44 stands) × 5-1/2 inch DP S-140 (21 stands) × 5-1/2 inch DP S-150 (25 stands) × XO × 6-5/8 inch DP Z-140
  LWD/MWD 1939.0 2100.0 4067.5 3058.5 5026.0 12-1/4 Bit × PDM × float sub (non-ported) × 12-1/4 inch stab × AFR × M5 (AGR + EWR + PWD + HCIM) × XBAT × HOC × 8-1/2 inch DC (12) × drilling jar × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (65 stands) × 5-1/2 inch DP S-140 (21stands) × XO × 5-1/2 inch DP S-150 (15 stands) × XO × 6-5/8 inch DP Z-140
  Underreamer 1939.0 1936.5 3904.0 2960.5 4928.0 12-1/4,
14-1/2
Bit × bit sub × 14-1/2 inch Anderreamer × float sub (w/flapper-type float) × 8-1/2 inch DC (1) × 12-3/16 inch × 8-1/2 inch DC (11) × drilling jar × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (67 stands) × 5-1/2 inch DP S-140 (21 stands) × XO × 5-1/2 inch DP S-150 (8 stands) × XO × 6-5/8 inch DP X-140
  Underreamer 1939.0 1936.5 3904.0 2960.5 4928.0 12-1/4,
14-1/2
Bit × bit sub × 14-1/2 inch Anderreamer × float sub (w/flapper-type float) × 8-1/2 inch DC (1) × 12-3/16 inch stab × 8-1/2 inch DC (11) × drilling jar × 8-1/2 inch DC (2) × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (67 stands) × 5-1/2 inch DP S-140 (21 stands) × XO × 5-1/2 inch DP S-150 (25 stands) × XO × 6-5/8 inch DP Z-140
  Underreamer 1939.0 1936.5 3904.0 2964.5 4932.0 12-1/4,
14-1/2
Bit × bit sub × 14-1/2 inch Anderreamer × float sub (w/flapper-type float) × 8-1/2 inch DC (1) × 12-3/16 inch stab × 8-1/2 inch DC (11) × drilling jar × 8-1/2 inch DC (2) × XO × 5.68 inch HWDP (12) × XO × 5 inch DP S-140 (67 stands) × 5-1/2 inch DP S-140 (21 stands) × XO × 5-1/2 inch DP S-150 (13 stands) × XO × 6-5/8 inch DP Z-140
  Casing run 1939.0 NA NA 2922.0 4889.5 NA 11-3/4 inch casing (G/S × 1 × F/C × 9 × L/C × 30 × 41, total 82 joints) × liner hanger × 5 inch DP (5 stands) × 5-1/2 inch DP S-140 (21 stands) × XO × 5-1/2 inch DP S-150 (25 stands) × XO × XO × 5-7/8 inch DP NK-155 (19 stands)

NA = not applicable. AFR = azimuthal focused resistivity tool, AGR = azimuthal gamma ray tool, ARC8 = arcVISION array resistivity compensated tool, CMT = drill stand, CST = concentric string tool, DC = drill collar, DGR = dual gamma ray tool, DP = drill pipe, EWR = electromagnetic wave resistivity tool, GVR = geoVISION resistivity tool, HOC = underreamer model, HWDP = heavy-wall drill pipe, ILS = instrument landing system, LWD/MWD = logging while drilling/measurement while drilling, PADPRT = pressure-assisted drill pipe running tool, PDM = positive-displacement motor, PWD = pressure while drilling tool, SD-RCB = small-diameter rotary core barrel system, stab = stabilizer, WBRRT = wear bushing running/retrieving tool, XBAT = azimuthal sonic/ultrasonic tool, XO = crossover sub.

Previous   |    Close   |    Next   |    Top of page