Previous   |    Close   |    Next

Table T6. Operations conducted during Expedition 312.

Operation in
Hole 1256D
Operation
start
Operation
end
Time Days
between
reentries
Comments
Local
time
(h)
Date
(2005)
Local
time
(h)
Date
(2005)
On hole
(h)
On site
(h)
On site
(days)
First coring equipment in water 0730 15 Nov 0730 15 Nov          
Initial trip and reentry number 1 0730 15 Nov 2030 15 Nov 13.00 13.00 0.54 0.00 RCB bit number 1, RBI C-9, SN CL-544
Trip in to 927 mbsf with bit number 1 2030 15 Nov 2330 15 Nov 3.00 16.00 0.67
Wash and ream to 944 mbsf 2330 15 Nov 1315 17 Nov 37.75 53.75 2.24
Trip from 944 mbsf and clear seafloor 1315 17 Nov 1525 17 Nov 2.17 55.92 2.33
On deck/Change assembly 1525 17 Nov 2100 17 Nov 5.58 61.50 2.56
Reentry number 2 2100 17 Nov 0435 18 Nov 7.58 69.08 2.88 2.56 SMITH F-2 tricone, SN YEO-106
Trip in to 903 mbsf with tricone drilling bit 0435 18 Nov 0830 18 Nov 3.92 73.00 3.04
Wash and ream 903–1255 mbsf 0830 18 Nov 0030 20 Nov 40.00 113.00 4.71
Trip out and clear seafloor 0030 20 Nov 0650 20 Nov 6.33 119.33 4.97
On deck/Change assembly 0650 20 Nov 1215 20 Nov 5.42 124.75 5.20
Reentry number 3 1215 20 Nov 1955 20 Nov 7.67 132.42 5.52 2.64 RCB bit number 2, RBI C-9, SN CL-541
TD = 1309.7 mbsf
Cored = 54.6 m
Recovered = 8.58 m
Recovery = 15.7%
Rotating time = 51.5 h
ROP = 1.1 m/h
Trip in to 1161 mbsf with bit number 2 1955 20 Nov 2330 20 Nov 3.58 136.00 5.67
Wash and ream 1161–1255 mbsf 2330 20 Nov 0715 21 Nov 7.75 143.75 5.99
RCB coring 1255.1–1309.7 mbsf 0715 21 Nov 0545 24 Nov 70.50 214.25 8.93
Trip out and clear seafloor 0545 24 Nov 0915 24 Nov 3.50 217.75 9.07
Slip and cut drilling line 0915 24 Nov 1015 24 Nov 1.00 218.75 9.11
On deck/Change bit 1015 24 Nov 1600 24 Nov 5.75 224.50 9.35
Reentry number 4 1600 24 Nov 2312 24 Nov 7.20 231.70 9.65 4.16 RCB bit number 3, RBI C-9, SN CL-542
TD = 1343.5 mbsf
Cored = 33.9 m
Recovered = 4.54 m
Recovery = 18.8%
Rotating time = 49.4 h
ROP = 0.7 m/h
30 m of fill on bottom
Trip in to 1205 mbsf with bit number 3 2312 24 Nov 0100 25 Nov 1.80 233.50 9.73
Wash and ream 1205–1310.1 mbsf 0100 25 Nov 0530 25 Nov 4.50 238.00 9.92
RCB coring 1310.1–1329.1 mbsf 0530 25 Nov 1600 26 Nov 34.50 272.50 11.35
Round trip deplugger at 1329 mbsf 1600 26 Nov 1730 26 Nov 1.50 274.00 11.42
RCB coring 1329.1–1343.5 mbsf 1730 26 Nov 2115 27 Nov 27.75 301.75 12.57
Trip out and clear seafloor 2115 27 Nov 0030 28 Nov 3.25 305.00 12.71
On deck/Change bit 0030 28 Nov 0600 28 Nov 5.50 310.50 12.94
Reentry number 5 0600 28 Nov 1418 28 Nov 8.30 318.80 13.28 3.58 RCB bit number 4, RBI C-9, SN CL-543
TD = 1367.5 mbsf
Cored = 54.0 m
Recovered = 1.31 m
Recovery = 5.46%
Rotating time = 40.2 h
ROP = 0.6 m/h
Trip in to 1247 mbsf with bit number 4 1418 28 Nov 1830 28 Nov 4.20 323.00 13.46
Wash and ream 1247–1343.5 mbsf 1830 28 Nov 2045 28 Nov 2.25 325.25 13.55
RCB coring 1343.5–1348.3 mbsf 2045 28 Nov 0630 29 Nov 9.75 335.00 13.96
Repair standpipe flow sensor 0630 29 Nov 0830 29 Nov 2.00 337.00 14.04
Wash ahead 1299–1348 mbsf 0830 29 Nov 0915 29 Nov 0.75 337.75 14.07
RCB coring 1348.3–1367.5 mbsf 0915 29 Nov 0300 1 Dec 41.75 379.50 15.81
Trip out and clear seafloor 0300 1 Dec 0620 1 Dec 3.33 382.83 15.95
On deck/Change bit 0620 1 Dec 1215 1 Dec 5.92 388.75 16.20
Reentry number 6 1215 1 Dec 1938 1 Dec 7.38 396.13 16.51 3.26 RCB bit number 5, RBI C-7, SN CL-537
Hole/bit problems.
Recover drill string to inspect condition of bit
Missing 4 cones
Trip in to 1285 mbsf with bit number 5 1938 1 Dec 0200 2 Dec 6.37 402.50 16.77
Wash and ream 1285–1367.5 mbsf 0200 2 Dec 0345 2 Dec 1.75 404.25 16.84
RCB coring 1367.5–1372.8 mbsf 0345 2 Dec 0900 3 Dec 29.25 433.50 18.06
Trip out and clear seafloor 0900 3 Dec 1200 3 Dec 3.00 436.50 18.19
On deck/Change to fishing magnet 1200 3 Dec 1745 3 Dec 5.75 442.25 18.43
Reentry number 7 1745 3 Dec 0225 4 Dec 8.67 450.92 18.79 2.28 Trip in with 9 inch magnet and 2 junk baskets
Trip in to 1298.0 mbsf 0225 4 Dec 0400 4 Dec 1.58 452.50 18.85
Wash to 1372.8 mbsf and work junk baskets 0400 4 Dec 0845 4 Dec 4.75 457.25 19.05
Trip out and clear seafloor 0845 4 Dec 1150 4 Dec 3.08 460.33 19.18
On deck/Change to fishing mill number 1 1150 4 Dec 1730 4 Dec 5.67 466.00 19.42
Reentry number 8 1730 4 Dec 0020 5 Dec 6.83 472.83 19.70 0.91 Trip in with 9½ inch mill and 2 junk baskets
Trip to 1278.0 mbsf and wash to 1372.8 mbsf 0020 5 Dec 0630 5 Dec 6.17 479.00 19.96
Mill junk 0630 5 Dec 1015 5 Dec 3.75 482.75 20.11
Flush hole with 50 bbl high-viscosity sweep 1015 5 Dec 1110 5 Dec 0.92 483.67 20.15
Mill junk 1110 5 Dec 1230 5 Dec 1.33 485.00 20.21
Trip out and clear seafloor 1230 5 Dec 1545 5 Dec 3.25 488.25 20.34
On deck/Change to fishing mill number 2 1545 5 Dec 2130 5 Dec 5.75 494.00 20.58
Trip to 2324 mbrf 2130 5 Dec 0145 6 Dec 4.25 498.25 20.76
Slip and cut drilling line 0145 6 Dec 0245 6 Dec 1.00 499.25 20.80
Trip 2324–3628 mbrf 0245 6 Dec 0515 6 Dec 2.50 501.75 20.91
Position and reentry number 9 0515 6 Dec 0530 6 Dec 0.25 502.00 20.92 1.22  
Trip to 1294.0 mbsf and wash to 1372.8 mbsf 0530 6 Dec 1015 6 Dec 4.75 506.75 21.11
Mill junk 1015 6 Dec 1430 6 Dec 4.25 511.00 21.29
Flush hole with 50 bbl high-viscosity sweep 1430 6 Dec 1630 6 Dec 2.00 513.00 21.38
Trip out and clear seafloor 1630 6 Dec 1930 6 Dec 3.00 516.00 21.50
On deck/Change to fishing magnet number 2 1930 6 Dec 0200 7 Dec 6.50 522.50 21.77
Reentry number 10 0200 7 Dec 0904 7 Dec 7.07 529.57 22.07 1.15 Trip in with 9 inch magnet and 2 junk baskets
Trip to 1295.0 mbsf 0904 7 Dec 1300 7 Dec 3.93 533.50 22.23
Wash 1295–1372.8 mbsf 1300 7 Dec 1430 7 Dec 1.50 535.00 22.29
Work magnet and junk baskets 1430 7 Dec 1530 7 Dec 1.00 536.00 22.33
Trip out and clear seafloor 1530 7 Dec 1850 7 Dec 3.33 539.33 22.47
On deck/Change to RCB bit number 6 1850 7 Dec 0003 8 Dec 5.22 544.55 22.69
Reentry number 11 0003 8 Dec 0754 8 Dec 7.85 552.40 23.02 0.95 RCB bit number 6, RBI C-9, SN CL-545
TD = 1398.6 mbsf
Cored = 25.8 m
Recovered = 1.39 m
Recovery = 5.39%
Rotating time = 45.1 h
ROP = 0.6 m/h
Trip to 1294 and wash to 1372.8 mbsf 0754 8 Dec 1300 8 Dec 5.10 557.50 23.23
RCB coring 1372.8–1398.6 mbsf 1300 8 Dec 0500 11 Dec 64.00 621.50 25.90
Clear seafloor 0500 11 Dec 0820 11 Dec 3.33 624.83 26.03
On deck/Change to RCB bit number 7 0820 11 Dec 1345 11 Dec 5.42 630.25 26.26
Deploy BHA 1345 11 Dec 1445 11 Dec 1.00 631.25 26.30
Slip and cut 115 ft drilling line 1445 11 Dec 1545 11 Dec 1.00 632.25 26.34
Reentry number 12 1545 11 Dec 2146 11 Dec 6.02 638.27 26.59 3.58 RCB bit number 7, RBI C-9, SN CL-546
TD = 1444.6 mbsf
Cored = 46.0 m
Recovered = 10.68 m
Recovery = 23.22%
Rotating time = 50.6 h
ROP = 0.9 m/h
Trip to 1326 and wash to 1398.6 mbsf 2146 11 Dec 0415 12 Dec 6.48 644.75 26.86
RCB coring 1398.6–1444.6 mbsf 0415 12 Dec 0500 15 Dec 72.75 717.50 29.90
Trip out and clear seafloor 0500 15 Dec 0810 15 Dec 3.17 720.67 30.03
On deck/Change to RCB bit number 8 0810 15 Dec 1345 15 Dec 5.58 726.25 30.26
Reentry number 13 1345 15 Dec 2220 15 Dec 8.58 734.83 30.62 4.02 RCB bit number 8, RBI C-9, SN CL-547
TD = 1507.1 mbsf
Cored = 62.5 m
Recovered = 18.49 m
Recovery = 29.58%
Rotating time = 53.0 h
ROP = 1.2 m/h
Trip to 1368 and wash to 1444.6 mbsf 2220 15 Dec 0130 16 Dec 3.17 738.00 30.75
RCB coring 1444.6–1507.1 mbsf 0130 16 Dec 0300 19 Dec 73.50 811.50 33.81
Treat hole for logging/Flush with mud 0300 19 Dec 0830 19 Dec 5.50 817.00 34.04
Trip out and clear seafloor 0830 19 Dec 1135 19 Dec 3.08 820.08 34.17
On deck/Change to logging BHA 1135 19 Dec 1715 19 Dec 5.67 825.75 34.41
Reentry number 14 1715 19 Dec 2318 19 Dec 6.05 831.80 34.66 4.04  
Trip to 289 mbsf and rig up for logging 2318 19 Dec 0130 20 Dec 2.20 834.00 34.75  
Make up/Deploy/Recover Triple combo 0130 20 Dec 1730 20 Dec 16.00 850.00 35.42  
Make up/Deploy/Recover VSI 1730 20 Dec 1930 21 Dec 26.00 876.00 36.50  
Make up/Deploy/Recover FMS-sonic 1930 21 Dec 0330 22 Dec 8.00 884.00 36.83 Communication problems
Make up/Deploy/Recover UBI 0330 22 Dec 1530 22 Dec 12.00 896.00 37.33  
Make up/Deploy/Recover FMS 1530 22 Dec 0330 23 Dec 12.00 908.00 37.83  
Make up/Deploy/Recover TAP/DLL/SGT 0330 23 Dec 1200 23 Dec 8.50 916.50 38.19  
Secure from logging 1200 23 Dec 1230 23 Dec 0.50 917.00 38.21  
Trip out and clear seafloor 1230 23 Dec 1345 23 Dec 1.25 918.25 38.26 Recover beacon at 1521 h on 23 Dec
Trip to 2000 mbrf 1345 23 Dec 1630 23 Dec 2.75 921.00 38.38  
Slip and cut drilling line 1630 23 Dec 1730 23 Dec 1.00 922.00 38.42  
Trip out and secure for voyage 1730 23 Dec 2200 23 Dec 4.50 926.50 38.60  

Notes: RCB = rotary core barrel. RBI = Rock Bit International. SN = serial number. TD = total depth. ROP = rate of penetration.

Previous   |    Close   |    Next   |    Top of page