Table T3. Measurement acronyms, units, vertical resolutions, and depths of investigation (where available) of LWD tools deployed during Expedition 311.
Tool | Output | Tool name/Explanation of output | Unit | Vertical resolution (cm) | Depth of investigation (cm) |
---|---|---|---|---|---|
ADNVISION |
Azimuthal Density Neutron tool | ||||
DCAV | Density caliper | inches | |||
TNPH | Thermal neutron porosity | % | 31 | ||
PEF | Photoelectric factor | b/e– | |||
RHOB | Density | g/cm3 | 15 | ||
IDRO |
Image-derived density | g/cm3 | |||
Oriented density images of borehole wall | |||||
EcoScope |
Multifunction tool | ||||
AXXH, AXXL, AXXB | Attenuation resistivity at source-receiver spacing XX, where XX = 16, 22, 28, 34, 40 inches | m | 55–122 | 48–102 | |
PXXH, PXXL, PXXB | Phase-shift resistivity at source-receiver spacing XX, where XX = 16, 22, 28, 34, 40 inches | m | 21–30 | 33–79 | |
GRMA_FILT | Calibrated, filtered gamma ray | gAPI | 46 | ||
DCAV | Density caliper | inches | |||
UAV | Ultrasonic caliper | inches | |||
IDPE | Image-derived photoelectric factor | b/e– | |||
TNPH | Thermal neutron porosity | % | 31 | ||
BPHI | Best thermal neutron porosity | % | |||
RHOB | Density | g/cm3 | 15 | ||
IDRO |
Image-derived density | g/cm3 | |||
Oriented density images of borehole wall | |||||
GeoVISION |
Resistivity-at-the-Bit tool | ||||
GR_RAB_FILT | Calibrated, filtered gamma ray | gAPI | 46 | ||
RBIT | Bit resistivity | m | 30–61 | 81 | |
RING | Ring resistivity | m | 8–10 | 55–64 | |
BDAV | Deep button resistivity average | m | 5–8 | 44–61 | |
BMAV | Medium button resistivity average | m | 5–8 | 38–53 | |
BSRAV |
Shallow button resistivity average | m | 5–8 | 28–41 | |
Oriented resistivity images of the borehole wall | 5–8 | ||||
ProVISION |
Nuclear Magnetic Resonance tool | ||||
MRP | Magnetic resonance porosity | % | 15–120 | 7 | |
BFV | Bound fluid volume | % | |||
FFV | Free fluid volume | % | |||
T2LM | Log mean T2 relaxation time | ms | |||
T2 | T2 distribution (30 values at each depth) | % | |||
SonicVISION |
Sonic tool | ||||
DTCC | Compressional wave slowness | µs/ft | 61 | ~10 |
Note: Output: H = 2 MHz resistivity, L = 400 kHz resistivity, B = blended resistivity. For the complete list of acronyms used in IODP and for additional information about tool physics, consult IODP-USIO Science Services, LDEO, at iodp.ldeo.columbia.edu/TOOLS_LABS/tools.html.
Previous | Close | Next | Top of page