Previous   |    Close   |    Next

Figure F3. Plot of responses to transient head difference (Δhs) during flow-through testing, Site C0001. Q = volumetric flow rate, K = hydraulic conductivity. Response measured using the differential pressure transducer for four redundant flow tests: Test Run 1 was conducted at volumetric flow rate of +0.006 cm3/min (bottom to top), Test Run 2 was conducted at volumetric flow rate of –0.006 cm3/min (top to bottom), Test Run 3 was conducted at volumetric flow rate of +0.01 cm3/min, Test Run 4 was conducted at volumetric flow rate of –0.01 cm3/min.

Previous   |    Close   |    Next   |    Top of page