Previous   |   Close   |   Next

Table T28. Inorganic geochemistry of solid samples, Hole U1332A. (See table notes.)

Core, section,
interval (cm)
Depth
CSF (m)
Major element oxide (wt%) Trace element (ppm)
SiO2 Al2O3 Fe2O3 T MnO MgO CaO Na2O K2O TiO2 P2O5 Ba Cr Cu Sc Sr V Y Zr
320-U1332A-
1H-3, 25–26 3.25 53.62 12.89 6.57 0.06 3.37 1.00 4.67 2.43 0.62 0.42 3230 54.8 772 29.8 212.5 86.9 189.3 204.9
3H-4, 65–66 18.55 59.20 8.57 4.62 0.86 2.97 7.37 5.22 1.59 0.37 0.89 4719 23.9 693 29.6 504.1 51.7 244.4 160.8
4H-6, 65–66 31.05 50.71 5.78 3.04 0.59 2.09 16.85 4.30 1.21 0.25 0.77 3992 15.9 382 18.8 803 28.3 168.5 112.4
5H-4, 65–66 37.55 19.04 2.74 1.36 0.27 1.00 36.62 2.14 0.68 0.12 0.41 1691 6.6 173 7.2 1744 9.1 74.2 56.2
7H-4, 64–65 56.54 12.09 0.45 0.40 0.03 0.31 39.14 1.45 0.24 0.01 BDL 885 20.9 53 1.4 1811 BDL 16.4 20.2
9H-2, 65–66 72.55 27.47 1.95 1.22 0.19 0.77 30.57 2.06 0.54 0.08 0.34 1216 7.6 145 5.9 1360 7.9 44.8 44.9
10H-1, 74–75 80.64 66.46 5.62 4.10 0.51 2.18 1.25 4.45 1.09 0.25 0.50 2990 20.4 398 17.0 171.7 37.7 110.7 104.1
12H-6, 65–66 107.05 74.34 1.09 2.63 0.46 1.41 0.43 3.29 0.44 0.05 0.18 1042 6.2 200 4.1 59.6 33.7 28.4 35.3
13H-6, 65–66 116.55 40.26 0.79 2.03 0.43 1.16 25.98 2.13 0.33 0.04 0.24 1433 6.1 220 2.9 855 10.3 37.1 31.4
14H-3, 64–65 121.54 70.74 1.69 4.70 0.83 2.16 0.68 3.36 0.58 0.08 0.28 1727 5.3 334 7.0 90.9 34.4 61.7 52.0
15X-4, 64–65 131.04 74.94 0.62 2.16 0.55 1.34 1.03 3.26 0.35 0.03 0.19 2427 BDL 213 3.5 108.5 19.9 28.8 28.1
17X-2, 50–51 146.33 41.02 3.60 27.43 21.14 5.25 2.66 8.98 1.67 0.22 1.35 4093 22.7 1847 14.8 455.6 404.2 224.8 108.6

Notes: BDL = below detection limit (SiO2 = 3.5 wt%, Al2O3 = 0.04 wt%, Fe2O3 T = 0.003 wt%, MnO = 0.0004 wt%, MgO = 0.007 wt%, CaO = 0.1 wt%, Na2O = 0.02 wt%, K2O = 0.004 wt%, TiO2 = 0.001 wt%, P2O5 = 0.1 wt%, Ba = 28 wt%, Cr = 5 wt%, Cu = 16 wt%, Sc = 0.4 wt%, Sr = 3 wt%, V = 4 wt%, Y = 1.7 wt%, Zr = 4 wt%). See Table T9 in "Methods" for maximum values of calibration.

Previous   |   Close   |   Next  |   Top of page