Previous   |   Close   |   Next

Table T7. Paleomagnetic directions used for reorientation of coherent blocks, Site C0011. (See table note.)

Core, section,
interval (cm)
Depth
CSF (m)
Lithologic
unit
Lithology Characteristic remanent magnetization
Declination
(°)
Inclination
(°)
Maximum angular
deviation (°)
322-C0011B-
6R-1, 119.5–122 385.21 II Clay 116.5 48.8 3.1
6R-8, 127–129 393.05 Clay 77.2 47.4 1.5
11R-3, 15–17 434.47 Clay 176.9 –42.7 5.1
11R-8, 12–14 439.60 Clay –47.0 –44.8 13.4
13R-6, 105–107 457.56 Clay –26.8 58.8 7.8
14R-5, 124–126 464.87 Clay 122.9 45.6 8.2
15R-1, 46–48 469.97 Clay 90.6 27.5 3.2
15R-4, 99–101 473.55 Clay –2.8 31.4 11.7
19R-4, 108–110 494.11 III Clay –107.7 71.1 3.0
21R-3, 4–6 502.31 Clay 166.3 53.0 11.7
21R-5, 106–108 506.15 Clay 48.2 –31.8 9.1
21R-8, 4–6 509.36 Clay –27.1 69.6 4.0
23R-7, 30–32 526.61 Clay –49.4 64.3 3.2
23R-7, 98–100 527.29 Clay –58.0 63.5 1.1
26R-4, 105–107 553.34 Clay 16.6 58.2 7.9
26R-5, 20–22 553.89 Clay 14.1 55.0 1.8
26R-6, 17–19 555.27 Clay –30.9 63.8 0.2
26R-7, 9–11 556.62 Clay –38.5 62.9 1.8
27R-1, 72–74 559.23 Clay –27.3 70.2 2.4
27R-4, 31–33 561.62 Clay –85.7 63.2 1.1
27R-5, 21–23 562.93 Clay –111.3 66.0 1.4
28R-1, 86–88 568.87 Clay 156.4 33.0 7.3
30R-4, 35–37 584.08 Clay –55.1 69.0 8.2
31R-1, 36–38 586.87 Clay 112.4 –40.3 9.3
31R-3, 30–32 588.71 Clay 41.6 55.2 14.8
32R-1, 86–88 596.87 Clay –51.0 55.9 3.8
32R-2, 113–115 598.57 Clay 26.6 67.0 6.5
39R-2, 2–4 663.94 Clay 18.7 57.4 5.2
40R-1, 112–114 673.13 Clay 176.9 60.9 8.0
44R-1, 115–117 690.16 IV Clay –67.0 62.8 8.3
44R-4, 32–34 692.02 Clay 5.5 64.5 8.0
48R-1, 53–55 721.54 Clay –16.9 71.2 3.9
49R-5, 85–87 734.42 Clay –112.2 58.9 6.5
51R-6, 97–99 753.74 Clay –39.4 48.4 3.9
51R-7, 126–128 755.45 Clay –43.7 70.9 8.6
54R-4, 121–123 774.05 Clay –72.9 69.5 8.2
56R-1, 4–6 844.05 Clay 47.9 60.2 3.2
56R-1, 44–46 844.45 Clay 46.1 49.7 1.1
56R-3, 20–22 845.38 Clay 133.2 56.2 5.4
57R-3, 15–17 849.38 Silty clay –60.7 60.4 7.7
58R-1, 16–18 856.07 V Fine-grained tuff 30.9 –47.9 6.8
58R-1, 41–43 856.32 Fine-grained tuff –173.4 63.5 3.1
58R-1, 98–100 856.89 Fine-grained tuff –118.1 70.4 2.1

Note: Maximum angular deviation calculated from Kirschvink (1980).

Previous   |   Close   |   Next   |   Top of page