Previous   |   Close  

Table T7. Measurement acronyms and units of wireline logging tools deployed during Expedition 323. (See table note.)

Tool Output Description Unit
APS           Accelerator Porosity Sonde  
APLC
Near array porosity %
STOF
Tool standoff inch
SIGF
Formation capture cross-section Capture units
DIT           Dual Induction Tool  
IDPH
Deep induction phasor-processed resistivity Ωm
IMPH
Medium induction phasor-processed resistivity Ωm
SFLU
Spherically focused resistivity Ωm
DSI         Dipole Sonic Imager  
DTCO
Compressional wave delay time (Δt) µs/ft
DTSM
Shear wave delay time (Δt) µs/ft
FMS           Formation MicroScanner  
C1, C2
Orthogonal hole diameters inch
P1AZ
Pad 1 azimuth °
Spatially oriented resistivity images of borehole wall
GPIT             General Purpose Inclinometry Tool  
DEVI
Hole deviation °
HAZI
Hole azimuth °
Fx, Fy, Fz
Earth's magnetic field (three orthogonal components) oersted
Ax, Ay, Az
Acceleration (three orthogonal components) m/s2
HLDS             Hostile Environment Litho-Density Sonde  
RHOM
Bulk density g/cm3
PEFL
Photoelectric effect barn/e
LCAL
Caliper (measure of borehole diameter) inch
DRH
Bulk density correction g/cm3
HNGS               Hostile Natural Gamma Ray Sonde  
HSGR
Standard (total) gamma ray gAPI
HCGR
Computed gamma ray (HSGR minus uranium contribution) gAPI
HFK
Potassium wt%
HTHO
Thorium ppm
HURA
Uranium ppm

Note: For the complete list of acronyms used in IODP and for additional information about tool physics and use, consult IODP-USIO Science Services, LDEO, at iodp.ldeo.columbia.edu/TOOLS_LABS/tools.html.

Previous   |   Close    |    Top of page