Previous   |   Close   |   Next

Table T15. Affine table indicating the amount that each core in each hole needs to be offset in order to construct a continuous record, Site U1342. (See table note.)

Core Depth (mbsf) Offset
(m)		 Depth CCSF-A (m) Recovered
(m)		 Recovery
(%)
Top Bottom Top Bottom
323-U1342A-
1H 0.00 1.80 0.00 0.00 1.80 1.75 97
2H 1.80 11.30 0.55 2.35 11.85 9.61 101
3H 11.30 20.80 1.01 12.31 21.81 9.71 102
4H 20.80 30.30 1.47 22.27 31.77 9.95 105
5H 30.30 39.80 2.20 32.50 42.00 9.92 104
6H 39.80 48.30 2.78 42.58 51.08 8.55 101
7H 48.30 49.30 2.78 51.08 52.08 7.44 744
8D 49.30 52.30 — — — 0.00 0
9X 52.30 53.30 — — — 0.46 46
323-U1342B-
1H 0.00 5.30 0.07 0.07 5.37 5.33 101
2H 5.30 14.80 0.04 5.34 14.84 9.78 103
3H 14.80 24.30 0.94 15.74 25.24 10.01 105
4H 24.30 33.80 1.50 25.80 35.30 9.77 103
5H 33.80 43.30 2.27 36.07 45.57 9.94 105
323-U1342C-
1H 0.00 7.20 –0.03 –0.03 7.17 7.22 100
2H 7.20 16.70 0.01 7.21 16.71 9.84 104
3H 16.70 26.20 1.14 17.84 27.34 9.67 102
4H 26.20 35.70 1.12 27.32 36.82 9.80 103
5H 35.70 45.20 2.03 37.73 47.23 9.98 105
6H 45.20 45.40 — — — 0.22 110
323-U1342D-
1H 0.00 6.00 –0.01 –0.01 5.99 6.11 102
2H 6.00 15.50 0.59 6.59 16.09 9.83 103
3H 15.50 25.00 1.31 16.81 26.31 9.62 101
4H 25.00 34.50 1.61 26.61 36.11 9.83 103
5H 34.50 44.00 2.36 36.86 46.36 9.90 104
6D 44.00 62.60 — — — 0.00 0
7X 62.60 66.60 — — — 0.55 14
8X 66.60 71.60 — — — 1.66 33
9X 71.60 75.60 — — — 3.84 96
10X 75.60 82.10 — — — 4.66 72
11X 82.10 87.90 — — — 3.34 58
12X 87.90 90.10 — — — 2.01 91
13X 90.10 94.90 — — — 4.64 97
14X 94.90 102.50 — — — 3.48 46
15X 102.50 106.10 — — — 1.48 41
16X 106.10 115.10 — — — 2.49 28
17X 115.10 117.70 — — — 5.70 219
18X 117.70 121.70 — — — 3.00 75
19X 121.70 127.70 — — — 4.23 70

Note: — = not applicable.

Previous   |   Close   |   Next  |  Top of page