Table T1. Hysteresis parameters for samples from Hole U1346A.
|
Core, section, interval (cm) |
Mr/Ms | Hc (mT) | Hcr (mT) | Hcr/Hc |
|---|---|---|---|---|
| 324-U1346A- | ||||
| 7R-3, 49−51 | 0.371 | 15.44 | 22.46 | 1.45 |
| 7R-4, 53−55 | 0.290 | 9.16 | 13.15 | 1.44 |
| 8R-1, 136−138 | 0.356 | 7.21 | 10.58 | 1.47 |
| 9R-1, 104−106 | 0.333 | 6.47 | 9.19 | 1.42 |
| 10R-1, 40−42 | 0.401 | 9.62 | 12.80 | 1.33 |
| 10R-2, 75−77 | 0.190 | 5.29 | 8.91 | 1.68 |
| 11R-1, 97−99 | 0.226 | 6.22 | 9.59 | 1.54 |
| 13R-2, 59−61 | 0.342 | 13.81 | 20.91 | 1.51 |
| 14R-1, 136−138 | 0.331 | 10.32 | 14.50 | 1.41 |
| 16R-1, 78−80 | 0.352 | 11.53 | 15.63 | 1.36 |
| 16R-2, 35−37 | 0.316 | 9.43 | 13.54 | 1.44 |
Mr = remanent magnetization, Ms = saturation magnetization, Hc = coercive field, Hcr = remanent coercivity field.
Close | Next | Top of page