Table T2. Pullout tension data.
| Site | Core length (ft) | Long fins (N) | Short fins (N) | Differential (lb) | Dominant lithology | Comments |
|---|---|---|---|---|---|---|
| SPG-1 | 30 | 4 | 0 | 5913 | Red clay | Pullout at 8 m/min |
| SPG-2 | 30 | 2 | 1 | 318 | ||
| SPG-3 | 20 | 2 | 2 | 158 | Red clay | |
| SPG-5 | 30 | 2 | 2 | 541 | Red clay | |
| SPG-6 | 20 | 2 | 2 | 4498 | Carbonate | |
| SPG-9 | 20 | 2 | 2 | 1056 | Red clay | |
| SPG-10 | 20 | 2 | 1 | –311 | Red clay |
Differential pullout tension is based on the difference between pre-trip tension and maximum pullout tension between cores with and without outrigger probes. No data were collected for Sites SPG-11 and SPG-12. N = number of fins.
Previous | Close | Next | Top of page