Table T2. Correction factors used to correct MSCL ρB from each core.
| Core | Lith. unit |
Average correction |
||||||
|---|---|---|---|---|---|---|---|---|
| 302- | ||||||||
| M0002A-1X | 1.1 | 0.99 | ||||||
| M0002A-2X | 1.1 | 0.99 | ||||||
| M0002A-3X | 1.2 | 1.04 | ||||||
| M0002A-4X | 1.2 | 1.04 | ||||||
| M0002A-5X | 1.3 | 1.05 | ||||||
| M0002A-6X | 1.3 | 1.10 | ||||||
| M0002A-7X | 1.3 | 1.07 | ||||||
| M0002A-8X | 1.3 | 1.07 | ||||||
| M0002A-9X | 1.3 | 1.09 | ||||||
| M0002A-10X | 1.3 | 1.08 | ||||||
| M0002A-11X | 1.3 | 1.04 | ||||||
| M0002A-12X | 1.3 | 1.05 | ||||||
| M0002A-13X | 1.3 | 1.05 | ||||||
| M0002A-14X | 1.3 | 1.03 | ||||||
| M0002A-15X | 1.3 | 0.99 | ||||||
| M0002A-16X | 1.3 | 1.05 | ||||||
| M0002A-17X | 1.3 | 1.02 | ||||||
| M0002A-18X | 1.3 | 1.07 | ||||||
| M0002A-19X | 1.3 | 1.05 | ||||||
| M0002A-20X | 1.3 | 1.09 | ||||||
| M0002A-21X | 1.3 | 1.05 | ||||||
| M0002A-22X | 1.3 | 1.05 | ||||||
| M0002A-23X | 1.3 | 0.99 | ||||||
| M0002A-24X | 1.3 | 1.02 | ||||||
| M0002A-25X | 1.3 | 1.02 | ||||||
| M0002A-26X | 1.3 | 1.05 | ||||||
| M0002A-27X | 1.3 | 1.01 | ||||||
| M0002A-28X | 1.3 | 1.05 | ||||||
| M0002A-29X | 1.3 | 1.04 | ||||||
| M0002A-30X | 1.3 | 1.00 | ||||||
| M0002A-31X | 1.3 | 1.05 | ||||||
| M0002A-32X | 1.3 | 1.07 | ||||||
| M0002A-33X | 1.3 | 1.02 | ||||||
| M0002A-34X | 1.3 | 1.06 | ||||||
| M0002A-35X | 1.3 | 1.00 | ||||||
| M0002A-36X | 1.3 | 1.05 | ||||||
| M0002A-37X | 1.3 | 1.01 | ||||||
| M0002A-38X | 1.4 | 1.02 | ||||||
| M0002A-39X | 1.4 | 1.01 | ||||||
| M0002A-40X | 1.4 | 1.03 | ||||||
| M0002A-41X | 1.4 | 1.03 | ||||||
| M0002A-42X | 1.4 | 1.05 | ||||||
| M0002A-43X | 1.4 | 1.03 | ||||||
| M0002A-44X | 1.5 | 1.02 | ||||||
| M0002A-45X | 1.5 | 1.03 | ||||||
| M0002A-46X | 1.6 | 1.09 | ||||||
| M0002A-47X | 1.6 | 1.02 | ||||||
| M0002A-48X | 1.6 | 1.00 | ||||||
| M0002A-49X | 1.6 | 1.03 | ||||||
| M0002A-50X | 1.6 | 1.03 | ||||||
| M0002A-51X | 2 | 1.03 | ||||||
| M0002A-52X | 2 | 1.03 | ||||||
| M0002A-53X | 2 | 1.00 | ||||||
| M0002A-54X | 2 | 1.03 | ||||||
| M0002A-55X | 2 | 1.00 | ||||||
| M0002A-56X | 2 | 1.03 | ||||||
| M0002A-57X | 2 | 1.01 | ||||||
| M0002A-58X | 2 | 1.00 | ||||||
| M0002A-59X | 2 | 1.03 | ||||||
| M0002A-60X | 2 | 1.02 | ||||||
| M0002A-61X | 2 | 1.04 | ||||||
| M0002A-62X | 2 | 1.16 | ||||||
| M0004A-1H | 1.2 | 1.04 | ||||||
| M0004A-2X | 1.2 | 1.02 | ||||||
| M0004A-3X | 1.3 | 1.08 | ||||||
| M0004A-4X | 2 | 1.03 | ||||||
| M0004A-5X | 2 | 1.03 | ||||||
| M0004A-6X | 2 | 1.05 | ||||||
| M0004A-7X | 2 | 1.04 | ||||||
| M0004A-8X | 2 | 1.03 | ||||||
| M0004A-9X | 2 | 1.03 | ||||||
| M0004A-10X | 2 | 1.04 | ||||||
| M0004A-11X | 2 | 0.98 | ||||||
| M0004A-15X | 2 | 1.03 | ||||||
| M0004A-18X | 3 | 1.04 | ||||||
| M0004A-10X | 3 | 1.06 | ||||||
| M0004A-20X | 3 | 1.01 | ||||||
| M0004A-21X | 3 | 1.02 | ||||||
| M0004A-22X | 3 | 1.07 | ||||||
| M0004A-23X | 3 | 1.04 | ||||||
| M0004A-27X | 3 | 1.05 | ||||||
| M0004A-28X | 3 | 1.04 | ||||||
| M0004A-29X | 3 | 1.04 | ||||||
| M0004A-30X | 3 | 1.04 | ||||||
| M0004A-32X | 3 | 1.04 | ||||||
| M0004A-33X | 3 | 1.04 | ||||||
| M0004A-34X | 3 | 1.04 | ||||||
| M0004A-35X | 3 | 1.04 | ||||||
| M0004C-1H | 1.1 | 0.97 | ||||||
| M0004C-2H | 1.1 | 1.05 | ||||||
| M0004C-3H | 1.2 | 1.03 | ||||||
| M0004C-4H | 1.2 | 1.07 | ||||||
| M0004C-5X | 1.2 | 1.00 | ||||||
| M0004C-6X | 1.2 | 1.04 | ||||||
| M0004C-8X | 1.3 | 1.04 | ||||||
| M0004C-9X | 1.3 | 1.04 | ||||||
Note: Bold text denotes cores for which the average correction factor from the corresponding lithologic unit/subunit was used.
Previous | Close | Next | Top of page