Table T7. Continuous measurement results for check samples (30 repetitions). (See table note.)
Reference material |
Na2O | MgO | Al2O3 | SiO2 | P2O5 | K2O | CaO | TiO2 | MnO | Fe2O3 |
---|---|---|---|---|---|---|---|---|---|---|
JA-1: | ||||||||||
Average (wt%) | 3.86 | 1.52 | 15.15 | 64.27 | 0.16 | 0.78 | 5.66 | 0.85 | 0.16 | 7.08 |
SD (wt%) | 0.04 | 0.02 | 0.03 | 0.06 | 0.004 | 0.009 | 0.008 | 0.008 | 0.002 | 0.01 |
RSD (%) | 1.1 | 1.5 | 0.2 | 0.1 | 2.3 | 1.1 | 0.1 | 0.9 | 1.3 | 0.2 |
3σ (wt%) | 0.13 | 0.07 | 0.08 | 0.17 | 0.01 | 0.03 | 0.02 | 0.02 | 0.006 | 0.04 |
JB-3: | ||||||||||
Average (wt%) | 2.83 | 5.19 | 17.23 | 50.83 | 0.29 | 0.78 | 9.67 | 1.43 | 0.18 | 11.86 |
SD (wt%) | 0.06 | 0.03 | 0.03 | 0.07 | 0.004 | 0.01 | 0.01 | 0.01 | 0.002 | 0.02 |
RSD (%) | 2.0 | 0.6 | 0.2 | 0.1 | 1.4 | 1.3 | 0.1 | 0.9 | 1.3 | 0.2 |
3σ (wt%) | 0.17 | 0.09 | 0.08 | 0.21 | 0.01 | 0.03 | 0.03 | 0.04 | 0.007 | 0.05 |
Note: SD = standard deviation, RSD = relative standard deviation, 3σ = control limit.
Previous | Close | Next | Top of page